Skip to product information
1 of 9

Desalinator sea water

Range SLE

Range SLE

From 100 to 750 m³/day

Energy saving: energy consumption less than 3kWh/m3, depending on the conditions of use Accessibility: easy maintenance Standard units come with the following features:
  • Feed pump with its strainer
  • Antiscalant and bisulfite injection
  • Sand filter with low filtration speed and automatic backwash
  • 20µ and 5µ filtration
  • High pressure pump
  • Energy recovery system
  • High rejection membranes
  • Automatic flushing at low pressure and high flow
  • Cleaning in place
  • Salinity control of the water produced
View full details

Access the complete documentation

Enjoy exclusive access to comprehensive technical information that will help you maximize the use of your equipment.

Log in
1 of 2
  • 2nd stage

    Production of industrial water in addition to the freshwater.

  • Containerisation

    Installation in a 10, 20 or 40 feet container for mobile applications.

  • Pre-treatments

    Dechlorination, acidification…

  • Post-treatments

    Chlorination, re-hardening filter…

For any other request, please contact us.

SLE32-42 in 40 feet container

The installation consists in 2 mobile containers. Each container produces 750m3/24h of freshwater.
The energy consumption is below 3kWh/m3 of freshwater produced.

The barge receiving these containers have been built by DAMEN for the Navy of Morocco.

SLE25-30 in 40 feet container

The installation consists in 3 mobile containers. Each container produces 500m3/24h of freshwater.
The energy consumption is below 3kWh/m3 of freshwater produced.

This installation has been provided to Koniambo Nickel Factory in New Caledonia.

SLE25-24

Designed for MSC cruise ships Divina & Precioza, built by STX France, the two SLE25-24 equipping each shipset provide a total freshwater production capacity of 800m3/24h.

Energy consumption is below 3kWh/m3 of freshwater produced.

SLE25-30 with ultrafiltration pre-treatment

Integrated in a 40-foot container, this reverse-osmosis system produces 500 tpd of fresh water.

The insulated and air-conditioned container incorporates an ultrafiltration pretreatment, a reverse osmosis desalination unit with its CIP (clean-in-place) circuit and a post-treatment module (chlorine injection, adjustment of pH, TH and TAC) .

This unit is intended for an island of BAHAMAS.